How to Check Card Sensors on a Primacy 1

If your Primacy ID card printer is experiencing card jams, you will need to calibrate the card path sensors on your Primacy printer.

Please note, cards must be loaded in the hopper.

To Calibrate Your Card Path Sensors

  1. Open the Evolis Print Center, and double click on the Evolis Primacy printer.Calibrate Ribbon Primacy 1
  2. Click on the Maintenance tab. In the Command bar, type Sa;p (must be exact), and click Send. The printer will then feed a card and check the card path sensors. The answer should be OK.